Eliturbo Agri greenhouse ventilation

To solve the problem of air exchange and circulation in greenhouse crops

The ideal ventilation system for greenhouse crops. The heat and humidity are distributed evenly without affecting the plants directly, avoiding the formation of condensation and mould.


ELITURBO AGRI greenhouses




The ventilation of Eliturbo Agri applied in greenhouse is distributed at low speed throughout the environment and is not directed directly on plants and crops, reduces the condensation that normally forms on the walls and on the ceiling, keeps the floor and plant benches dry, avoids drips from the ceiling, avoids the formation of condensation and mould, evens out the development and growth of plants and crops throughout the whole greenhouse.
During the hot seasons it activates the exchange of ambient air with the external one through the greenhouse openings and creating a more oxygenated ventilation.
This type of ventilation evenly distributes heat and humidity throughout the environment, avoids the stratification of hot air towards the upper part of the room, the formation of condensation on the floor, on the walls and on the ceiling.
This ventilation does not generate annoying draughts and does not raise dust, improves the microclimate of the environment, reduces heat losses and in winter it provides an important energy saving (30%).




Eliturbo Agri, equipped with a special helicentrifugal impeller (patent of Impresind), pulls the air from the ceiling and mixes it. The air that is mixed is redistributed throughout the environment in a radial way at 360 degrees.
Eliturbo Agri produces a long horizontal air throw (up to 10 m.) and thanks to the alternating directions of rotation it can distribute the warm air and humidity horizontally throughout the environment without the need to use air ducts.
Eliturbo Agri is equipped with a circular protection structure that prevents accidental contact with the fan blades even for any birds present in the greenhouse.

Without Eliturbo

Without eliturbo the warm air accumulates toward the ceiling.

With Eliturbo

With eliturbo the warm air does not accumulate towards the ceiling.

Without Eliturbo

Without eliturbo the warm air is not distributed evenly in the building.

With Eliturbo

With eliturbo the warm air is distributed evenly in the building.


On the contrary, the traditional destratificators (ceiling fans) simply push the air from the ceiling to the floor, transferring all the humidity and smells below, without creating a real mixing of the air, but only by generating annoying draughts on plants and cultivations.
Eliturbo Agri is an international patent of impresind.

miscelatore d'aria


Why choose Eliturbo

air changeLarge air recirculations thanks to the special patented impeller
soft ventilationIt does not produce annoying draughts by guaranteeing an almost imperceptible ventilation at the people’s level
air distributionDistributes the air in all the building without the need for air ducts
moneyReduces the stratification of the air consequently saving up to 40% energy consumption for heating
temperatureEvenly distributes both vertically and horizontally the air temperature and humidity in all the building
thumb upPre-assembled for easy installation




Model 2002

Eliturbo E.L.C. series ERP 2009/125 EU Reg.   2000 2002
Technical data        
Absorbed power P W 220 310
Electrical supply   V 230V-1_50Hz/400V-3_50Hz
Fan type Ceiling air mixer
Motor protection grade   IP 54/55
Blade version n. of blades 2 4
Total air movement*   m3/h 7500 10000
Fan speed   RPM 700 700
Fan flow rate F m3/min 82 110
Operating values SV (m3/min)/W 0.37 0.35
Stand-by electrical consumption Psb W NA NA
Average air speed C meters/sec 0.64 0.86
Sound power level LwA db(A) 62.5 64.1
Diameter Ø mm 680
Heigth h mm 560
Widht   kg 16 18
External finishing Epoxy powder paint
Measurement standard IEC60879 - EN ISO1680

* treated air + induced air